- WEB EXCLUSIVE
- PE COFFEEHAUS
Direct USB interface on new data loggerOnset Computer recently introduced the HOBO U12 Family, a line of four high-resolution, high-accuracy data loggers for measuring temperature, relative humidity, light intensity and other indoor environmental conditions. New features since the H8 line include 12-bit resolution, higher precision sensors, 43,000 measurements capacity and a direct USB interface.
Onset Computer Corporation
eProduct Number 412
A certifiably accurate H2S detector tubeAn SEI-certified H2S detector tube with an ideal range for monitoring the OSHA PEL for H2S exposure, the Gastec Hydrogen Sulfide Detector Tube No. 4LL requires only one pump stroke for a measuring range of 2.5 to 60 ppm. Sample results can be achieved in one minute and there is no user calibration or separate pretreatment tube required for testing. Tube No. 4LL provides users with an ideal range to monitor compliance of the OSHA Permissible Exposure Limit Ceiling of 20 ppm and 50 ppm for a 10 minute peak.
(813) 249-5888 ext. 22
eProduct Number 413
Temperature logger lowers cost of high accuracyTelatemp recently introduced ValuTemp, a precise, low-cost data logger that can record up to 8,192 time-stamped temperature measurements for -55ºC to 125ºC with a 0.1ºC resolution and ±0.5ºC or better accuracy. Reusable and available with NIST traceable certification, the $49.00 logger is ideal for monitoring temperature during transit and storage.
eProduct Number 414
COD test method speeds resultsThe accu-TEST™ COD method can now be used for rapid evaluation of wastewater at low cost. COD measurements are often used to predict BOD and determine waste strength when EPA reporting is not required. The colorimeter-based test uses the EPA-accepted micro version of the Standard Methods procedure, but the standard time for digestion of the sample, two hours, can be lessened for a more rapid result.
eProduct Number 415
Quality test-tool value kits are no FlukeFluke has added four new value kits intended to provide a more economical product as opposed to the company's industry-leading line of testing equipment. The Voltage and Continuity Tester Kit contains basic electrical tests, the T5-H5-1AC kit combines the former with a current tester and holster, the 1AC Five Pack provides a free detector with the purchase of four, and the MicoScanner Pro VDV Kit is a voice-data-video verification tool kit including a MicroScanner Pro, wiremap adapter, coax adapter, bare wire adapter, office identifier plugs, the MicroProbe Instructive Tone Probe, a multi language user guide and interactive CD along with a $100 rebate.
eProduct Number 416
Flowserve launches Master Station IILimitorque, a member of the Flowserve Flow Control Division introduced the Limitorque Master Station II, a master station designed specifically for use with the Limitorque line of DDC-100 field units. The Master Station II is a virtually maintenance-free, plug-and-play solution that provides complex control and diagnostics of Limitorque field units through a simple touch-panel operator interface. Designed for power, petrochemical, oil and gas, water and wastewater applications, the Master Station II supports all Limitorque DDC-100 field units including the MX, L120, and LY.
eProduct Number 417