Product Spotlight

Water Insertion Flow Meter

The Model 640S Waste Water Insertion Flow Meter is an economical solution for monitoring mass flow of air in waste water treatment plants. The instrument can withstand extreme outdoor conditions, provide direct mass flow measurement with a single pipe penetration, interface with distributed control systems, measure a wide range of flows, and minimize pressure drops.

Sierra Instruments
Monterey, Calif.
(800) 866-0200
www.sierrainstruments.com

Grinder Prevents Downstream Maintenance

The Pipeliner™ grinder prevents expensive maintenance of downstream process equipment by eliminating ragging in secondary and tertiary sludge applications. The single-shaft grinder with self-adjusting cutters provides an effective solution to the problem of inconsistent particle size frequently associated with handling solids in wastewater treatment processes. The unit minimizes clogging and shortens mixing and filtration cycles.

Moyno Inc.
Springfield, Ohio
(877) 4-UMOYNO
www.moyno.com

Ultrafiltration Cartridge Reduces Footprint

The PMPW™-10 ultrafiltration cartridge, a certified, NSF-61 compliant, 10-inch diameter, hollow fiber cartridge for potable water treatment, contains 60 percent more membrane area and provides 60 percent more product water than its 8-inch predecessor, resulting in significant cost savings for municipal water treatment plants. The greater output of the PMPW-10 cartridge results in systems with fewer skids.

Koch Membrane Systems Inc.
Wilmington, Mass.
(888) 677-5624
www.kochmembrane.com

Fine and Course Bubble Diffusers

Tideflex Technologies' Tubeflex^® Fine Bubble and TFA Coarse Bubble Diffusers feature a hollow core for reduced buoyancy and a flexible connection to eliminate breakage. The diffusers incorporate the company's check valve technology to prevent clogging of the header pipe and reduce maintenance needs. Both diffusers are outlined in the above-pictured brochure.

Tideflex Technologies Inc.
Pittsburgh, Pa.
(412) 919-0919
www.tideflex.com

Wash Water Treatment System

The EP-SD3 represents a new generation of electrocoagulation water treatment systems for wash water generated from washing vehicles and equipment. The compact treatment system, designed to treat wastewater then discharge to sewer, can treat wastewater at a flow rate of up to 750 GPD. Average treatment cost is $3.00 per 1,000 gallons.

OilTrap Environmental
Tumwater, Wash.
(503) 524-9393
www.oiltrap.com

Monster on Cutting Edge of Small Grinders

The new, more compact Channel Monster^® CMD1205-AD is the perfect protector for small pump stations and influent channels everywhere. The unit's design is similar to the current Channel Monster products, but employs a new 5-inch-diameter drum to direct solids into the cutting chamber, allowing installations in channels as narrow as 14 inches. It performs at the same level as taller, 18-inch, two-shafted grinders.

JWC Environmental
Costa Mesa, Calif.
(800) 331-2277
www.jwce.com