Eliminate corrosion with Vanton thermoplastic pumps

All wet end components of a Vanton pump are molded of solid PVC, PP, PVDF or other thermoplastics that are 100% inert to the fluid handled and offer exceptional abrasion resistance. This enables Vanton pumps to resist acids, caustics, salts, solvents, chlorides, halogens, and other aggressive chemicals that can corrode pumps made with stainless steel and high alloys, and damage those with plastic linings and fiberglass-reinforced plastics. As a result, you eliminate corrosion, minimize wear, reduce maintenance and dramatically extend pump life.

Vanton offers three types of pumps, each in a range of models and materials: SUMP-GARD® Vertical Centrifugal Pumps, CHEM-GARD® Horizontal Centrifugal Pumps, and FLEX-I-LINER Rotary Peristaltic Pumps.

SUMP-GARD® vertical pumps are available in standard, bearingless, low headroom, wash down, integral motor/shaft and vortex models for sumps to 50 ft. (15 m) deep, flows to 1450 gpm (330 m3/hr) and heads to 245 ft. (85 m) at temperatures to 275°F (135°C).

CHEM-GARD® Horizontal Centrifugal Pumps are offered in standard, ANSI, mag drive, close coupled and self priming configurations, and handle flows to 1450 gpm (330 m3/hr) and heads to 400 ft (122 m) at temperatures to 275°F (135°C).

FLEX-I-LINER® Rotary Peristaltic Pumps are available in designs for transferring liquids, viscous fluids, and gases at flows from .33 to 40 gpm (1.26 l/m to 9.0 m3/h) and pressures to 45 psig (310 kPa) at temperatures to 250°F (121°C).

All pumps are offered as stand-alone units or integrated with automated, non-metallic Pump/Tank Systems from 60 to 5000 gal (227 to 1827 liter) in stationary or mobile configurations.

Vanton Pump & Equipment Corp.
1-908-688-4216
mkt@vanton.com
www.vanton.com