Laboratory Exhaust Presents Special Challenges
Housed at Reese Technology Center, The Institute of Environmental and Human Health (TIEHH), a research and academic program of Texas Tech University, contains a series of environmental laboratories that previously served as engineering work bays when the Center was still active as Reese Air Force Base. This particular building was previously an Air Force civil engineering building.
One of the laboratories needed a canopy hood and rooftop stack system to capture and exhaust odors and fumes created during the research experiments.
Previously, the university’s physical plant engineering department had built its own custom hood stacks on site, but limited space, funding and time prompted the project estimator at Texas Tech to look into other options. External funding was available to fund the project if the university could find a way to complete the project during the timeframe in which funding was available.
The Solution: Greenheck’s TCB-LE Lab Exhaust System.
Because the building had not been designed originally as a science building, there was very limited space on the roof for lab exhaust systems. The TCB-LE’s compact footprint not only preserved valuable roof space but it also required only a single roof penetration. Another benefit – the TCB-LE stack is engineered to not require any unsightly guide wires. The TCB-LE was a cost effective alternative to standard field built-up fan and stack assemblies. In addition, the one-piece TCB-LE met ANSI Z9.5, UL 705 and ASHRAE lab design guidelines.
It was also important to Texas Tech that equipment maintenance could be accomplished easily for its staff. The TCB-LE provides safe, easy inspection and maintenance of internal fan components. By removing one access panel, service to the fan wheel, shaft and bearing assembly is accomplished without removing the fan from the system. This improved process not only is much easier, but can be accomplished much more efficiently on the TCB-LE laboratory exhaust system.
How does the exhaust system work? A high velocity exhaust cone incorporated in the TCB-LE displaces hazardous or noxious laboratory fumes high above the roof, preventing roof damage and re-entry of exhaust effluent in to the building’s make-up air system. An optional bypass air plenum and damper adds ambient air to the exhaust, to further dilute fumes and provides additional exhaust displacement or allows the TCB-LE to be applied to variable volume lab exhausts.
The Results
A laboratory exhaust system that exceeds design and engineering specifications and space considerations.
The TCB-LE lab exhaust system was specified, built, shipped and installed within six weeks – well within the deadline to qualify for the external funding to cover the costs for this project. The client avoided a lengthy and costly installation process for a built-up system and is very pleased with the performance of the lab exhaust system.
Phone: (715) 359-6171
Fax: (715) 355-2399
E-mail:
Web: www.greenheck.com
